5`14
Controlling How Your Copies Will Look
The following sections describe how to assess the quality of your original document and
how to make adjustments that will improve the appearance of your copies.
Use the following table to decide if you need to modify your original or the copier
settings before copying.
Goal: Do this
:
Graphic illustrations and
photographs as sharp as possible
Adjust the Resolution setting to
Photo
.
Lighten or darken the copy while
scanning
Adjust the Fax/Copy Contrast setting.
Copy a document that's smaller
than standard sizes or a document
that's torn
Insert the original document into a protective document
carrier before copying. (A document carrier is a clear
plastic holder that looks something like a page protector.
It's available at most office supply stores.)
Copy a document that's stapled or
paper-clipped
Remove staples and paper clips from the document
before copying.
CAUTION:
Failure to remove staples and paper clips
before copying can cause permanent damage to the
scanner inside the HP OfficeJet LX.