Filter
Top Products
2`8
Applies To ...Use Whenever You Need To ...Setting
Receive Fax
Setup
Change the
Receive Mode
, which depends on whether you have a
separate fax line and/or a telephone answering machine.
Change the number of times your telephone should ring before the
HP OfficeJet LX answers (applies only when the receive mode is
set to Auto). The factory setting is
Rings to Answer=2
.
Specify whether each page of incoming faxes should be reduced to
fit on one page of the loaded paper size. The factory setting is
Automatic Reduction=On
.
Specify whether incoming faxes should be received to memory if
an error occurs.
The factory setting is Backup Reception=On.
Specify whether you are using a distinctive ringing service.
The
factory setting is Distinctive Ring=Off.
Specify whether you want to receive faxes from older-model fax
machines that don't emit a fax signal.
The factory setting is Silent
Detect=Off.
Specify whether remote dial-in is allowed.
The factory setting is
Remote Service=Off.
Receive Mode, Rings to
Answer, Distinctive Ring,
and Silent Detect apply to
both paper and PC faxes.
Automatic Reduction
applies only to paper faxes.
Backup Reception applies
only to paper faxes.
Route Received
Faxes
Specify whether incoming faxes should be sent to the printer or to
the PC.
The factory setting is Route Received Faxes=To Printer.
This setting switches
between paper and PC
faxing (for incoming
faxes).
Loaded Paper
Size
Specify the type of paper that is currently loaded: Letter, Legal,
A4, Exec, or Envelope. You will need to change this setting
whenever you load a different size of paper.
The factory setting for
the U.S. is Loaded Paper Size=Letter. The factory setting for
Europe is Loaded Paper Size=A4.
Loaded Paper Size
specifies the size of paper
that is loaded for printing,
copying, and paper faxes.
Copy Reduction Set the percentage that a copy will be, relative to the original.
The
factory setting is Copy Reduction=100%.
Copy Reduction applies to
copies.
Sounds Turn off or adjust the volume of sounds that the device
makes.
The factory settings are Ringer=On, Beeps=On, Ring and
Beep Volume=Soft.
The Sounds settings apply
to both paper and PC faxes.