Filter
Top Products
2`7
Running Eclipse FAX SE from the HP OfficeJet
LX Manager
There may be times when you want to run Eclipse FAX SE directly from the HP OfficeJet LX Manager. To
do so, from the HP OfficeJet LX Manager menu bar, choose
File/Run Eclipse FAX SE
.
For information about using Eclipse FAX SE, see chapter 4.
Reviewing the Device Settings
The table below shows the device settings that you can change with the HP OfficeJet LX Manager. It also
gives the factory settings (defaults), where applicable. Each option is explained in the following pages.
Setting Use Whenever You Need To ... Applies To ...
Send Fax Setup Change the
Fax Header
(current date and time, name, and
number) that is printed at the top of all faxed pages.
Specify tone or pulse.
The factory setting is Dialing Mode=Tone.
Specify whether faxes that fail the first time should be re-dialed.
The factory setting is Automatic Redial=On
.
All settings apply to both
paper and PC faxes. For PC
faxes, Automatic Redial is
managed from the PC.
Speed Dial Setup Add, change, or delete the names and fax numbers of people to
whom you frequently send faxes.
Add, change, or delete a speed dial group, which lets you send a
fax to multiple recipients.
Print a report of your speed dial entries.
Speed Dials apply only to
paper faxes.
Scanned Image
Quality
Change the contrast (light, normal, or dark) for copies and
outgoing faxes.
The factory setting is Contrast=Normal.
Change the resolution (standard, fine, or photo) for outgoing faxes.
The factory setting is Resolution=Standard.
The Contrast and
Resolution settings apply
only to paper faxes and
copies. (Eclipse FAX SE
has its own Resolution
setting, which may or may
not be the same as the HP
OfficeJet LX Manager
setting.)
Manager
2. OfficeJet LX