Filter
Top Products
1`7
Install the Print Cartridge
With the control panel and top cover still open,
locate the empty print cartridge cradle inside the
HP OfficeJet LX on the right side.
Open the print cartridge box and container, then
grasp the print cartridge by the green top and
remove the cartridge from the container. Gently
remove both
pieces of tape-blue and
white-covering the ink nozzles and vent hole.
CAUTIONS:
1) If you don't remove the white
tape, you deplete the ink in the cartridge
prematurely. 2) Be careful not to touch the ink
nozzles or the copper contacts. Fingerprints may
damage them.
Print cartridge cradle
OJ-42
OJ-16
Remove both pieces of tape!
Place the print cartridge down into the cradle as
shown. Align the green arrow on the cartridge top
with the green dot on top of the cradle.
Push the green arrow toward the green dot until
the cartridge
snaps
into place.
1. Installing