Filter
Top Products
3`7
Sending Paper Faxes to Multiple Fax Numbers
Use this procedure to send one document to multiple fax numbers (sometimes called
broadcasting).
Do this:
Using
these buttons: For this display:
1.
Dial a fax number OR press
Speed Dial
and a
two-digit code number. (The example shown is
"5552312.")
0
through
9
Press START to send
5552312
2.
Press
Enter/Save
(not
Start/Copy
).
Enter/Save
Enter another?
1=Yes 2=No
3.
Press
1
to enter another fax number.
1
Enter fax number
2:
4.
Repeat steps 1 and 2 until you've entered all
your fax numbers (up to 10 fax numbers can be
entered). Then press
2
at the "Enter another?"
prompt to quit adding fax numbers.
2
Load document
then press START
5.
Load your document. The bottom line of the
display will tell you how many fax numbers will
be dialed. (The example shows that three fax
numbers will be dialed.)
Loading document
Group size: 3
Press START to send
Group size: 3
6.
Press
Start/Copy
to begin faxing. First the
document is scanned into memory, then the fax
numbers are dialed, one at a time, in the same
sequence in which you entered them.
Start/Copy
Storing...
Memory used: xx%
Notes: 1) If your document does not fit into the memory of the HP
OfficeJet LX, you cannot use this shortcut. The data you
entered will be cancelled and you will need to send the
document to one fax number at a time.
2) If you frequently send a fax to the same group of fax
numbers, consider storing this group of fax numbers into a
single speed dial code for faster dialing. Refer to "Setting Up a
Speed Dial Group."
Faxes
3. Paper