Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 93
Note: Since the NDIS WAN CAPI drivers are installed, you have the
option of using “CAPIWAN (ISDN1)” or “CAPIWAN (ISDN2)”
for the Internet connection. However, the choice depends on the
Internet access software you want to use.
5. In the next window, enter the phone number to dial your access provider.
6. Finally, click Finish.
Creating a connection using both B channels
This technique is also referred to as "multilinking". To create a connection in
Windows NT 4.0 using both bB channels, do the following:
1. Create a new Dial-Up Networking connection as described in “Creating a
connection using one B channel” on page 86.
If the option Multilink all ISDN lines appears during the setup, do not
activate it. This option may result in malfunctions due to an improper
configuration.
2. Once the new connection has been completed, click More and select Edit
entry and modem properties in the drop-down menu.
ISDNmst.fm Page 93 Wednesday, January 15, 2003 9:22 AM