Filter
Top Products
10. Configuration and diagnostics of the IBM International ISDN PC Card 59
Note: If you activated either of the North American switch types NI-1 and
5ESS, you must configure the directory numbers and SPIDs separately.
Do this by clicking Configure in the IBM International ISDN PC Card
Properties window (see the illustration above). The following window
opens in which you can select the ISDN line and where you type both
the directory number (in the Phone number field) and the SPID. When
you have done so, click OK to save the settings. The directory
numbers and SPIDs for your ISDN line must be obtained from your
ISDN service provider (telephone company).
6. Click OK and then restart the computer.
Configuring multiple subscriber numbers (MSNs)
Note: The following section describes how to add or change the configuration
of Multiple Subscriber Numbers in the NDIS WAN CAPI device driver.
Although MSNs can be configured in the device driver, you should enter
MSN settings only in applications that require them. You must have the
NDIS CAPI WAN device drivers installed in order to perform the
ISDNmst.fm Page 59 Wednesday, January 15, 2003 9:22 AM