Filter
Top Products
13. ISDN CAPI Port Device Driver 191
ATS41= 0 B1 protocol: sets X.75
(default)*
ATS42= 0 B2 protocol: sets X.75
(default)*
8 B2 protocol: sets
X.75/V.42bis data
compression*
ATS43= 0 B3 protocol: sets X.75
(default)*
ATS44= 2 CIP value: sets X.75
(default)*
ATS45= 2048 Frame size
ATS48= 1 For multiple active ISDN-
Controllers (like the AVM
Controller B1), sets the
number of the CAPI 2.0
controller used, or (for the
AVM Controller C4) the
number of the So port.
ATS49= <number> Sets number for outgoing
calls***
ATS50= <number> Sets number for incoming
calls***
ATS51= 0 Asynchronous PPP
("modem style", RFC 1162
1 Synchronous PPP ("PPP
over ISDN", RFC 1618)
(default)
ATS54= 0 No caller ID suppression
(default)
1 Caller ID suppression
active***
ATA Accept an incoming call
ATD 0...9 Dial specified number
L Dial previous number
PIgnored
TIgnored
ATE 0 Echo in command mode off
1 Echo in command mode on
(default)
AT Command Va lue Parameter
ISDNmst.fm Page 191 Wednesday, January 15, 2003 9:22 AM