Filter
Top Products
142 IBM ISDN PC Card:User’s Guide
Your IBM International ISDN PC Card is now ready to use with communication
software that is not CAPI-2.0 compliant. You will also find a Windows Help file
for the CAPI Port Drivers on your Windows NT 4.0 desktop.
Activating the CAPI Port Drivers in Windows NT 4.0
To activate the CAPI Port Drivers in Windows NT 4.0 Workstation, first check
whether the Windows NT 4.0 Workstation Remote Access Service has been
installed onto your computer.
To activate the CAPI Port drivers in Windows NT 4.0, do the following:
1. Double-click the My Computer icon on the desktop, then the Dial-Up
Networking icon.
2. A message may then appear informing you that the phonebook is empty.
Click OK. If the New Phonebook Entry Wizard opens, or a dialog like the one
illustrated below, then Dial-Up Networking is properly installed on your
Windows NT 4.0 Workstation computer. In this case, close the My Computer
window and continue from “Adding CAPI Ports to an existing RAS
installation” on page 144. Otherwise, read “CAPI Port Drivers” on page 129.
3. Now click the Add button to install the next RAS-capable device. In the dialog
that appears, click OK again. Repeat this procedure until you have added all
the RAS-capable devices available. Finally, click Continue.
4. In the dialogs that follow you will complete the RAS configuration. Follow the
instructions displayed.
ISDNmst.fm Page 142 Wednesday, January 15, 2003 9:22 AM