Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 123
4. If you did not enter an MSN in the previous step, WinFax PRO displays a
warning that you must enter an MSN in order to receive faxes. At this point
you must enter an MSN.
5. When you have done so, click Finish in the last window. Now the Select
Locations for Generic ISDN (CAPI 2.0) window opens. Usually all the options
in this window are enabled. Leave these settings as they are and click OK.
6. If you have not yet configured your country information for modem dialing, a
message appears asking whether you want to configure how this device dials
when sending faxes. Click Yes.
7. On the Locatio” page in the Dialing Properties window, select the country you
are in and add your area code and phone number. Then click OK.
8. In the Modem and Other Fax Device Properties window, click OK. This
completes the configuration of WinFax PRO 9.x.
ISDNmst.fm Page 123 Wednesday, January 15, 2003 9:22 AM