Filter
Top Products
© Copyright IBM Corp. 2002 27
6. Installing the device drivers in Windows Me
The device drivers for the IBM International ISDN PC Card are installed in two
steps:
1. Install the CAPI 2.0-compliant device drivers
2. Install the NDIS WAN CAPI device drivers
Installing the IBM International ISDN PC Card in Windows Me
To install the IBM International ISDN PC Card in Windows Me, proceed as
follows:
1. Turn off the computer, choose a PCMCIA slot and insert the IBM International
ISDN PC Card into this slot without the ISDN cable attached.
2. Turn the computer back on. The New Hardware Wizard opens and reports
that it has detected an ISDN-CARD.
3. Now insert the CD labeled IBM International ISDN PC Card Installation
Software into your computer CD-ROM drive.
4. Since Windows Me cannot find the proper device driver for the adapter
automatically, select the option Specify the location of the driver (Advanced)
in the Add New Hardware window. Then click Next.
5. In the next window, click to remove the check mark next to the option
Removable Media (Floppy, CD-ROM,...), then click Browse. In the Browse
for Folder window, select the CD-ROM drive and double-click the directory
WINME and then the DRV directory. Click Next to confirm your selection.
ISDNmst.fm Page 27 Wednesday, January 15, 2003 9:22 AM