Filter
Top Products
© Copyright IBM Corp. 2002 7
4. Installing the device drivers in Windows 95
The device drivers for the IBM International ISDN PC Card are installed in two
steps:
1. Install the CAPI 2.0-compliant device drivers
2. Install the NDIS WAN CAPI device drivers
The following section explains in detail the prerequisites for the device driver
installation, and how to perform the installation on your specific version of
Windows 95.
Determining the Windows 95 version in use
Before you begin installing the IBM International ISDN PC Card in Windows 95,
check which version of Windows 95 you are using. For this purpose, Microsoft
has released the following instructions for determining the Windows 95 version
on its technical support Web site:
1. In the Control Panel, double-click the System icon.
2. Click the General tab.
3. Locate the version number under the System heading and compare it with the
following table:
A comprehensive, up-to-date article on this subject can be found on the Web at the
following site:
http://search.support.microsoft.com
Search for the article Q158238.
Release Versi on File Date
Windows 95 retail, OEM 400.95 11/07/95
Windows 95 retail SP1 4.00.950A 11/07/95
OEM Service Release 1 4.00.950A 11/07/95
OEM Service Release 2 4.00.1111 (4.00.950B) 24/08/96
OEM Service Release 2.1 4.03.1212-1214 (4.00.950B) 24/08/96-27/08/97
OEM Service Release 2.5 4.03.1214 (4.00.950C) 24/08/96-18/11/97
ISDNmst.fm Page 7 Wednesday, January 15, 2003 9:22 AM