Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 153
Once the computer has restarted the removal of the CAPI Port Drivers is
complete.
To remove the CAPI Port drivers from Windows NT 4.0:
Throughout this section it is assumed that you are logged on to the Windows NT
4.0 Workstation system as Administrator. If you are not logged on as
Administrator, you may not be able to perform all the steps outlined in this
section.
1. Leave the IBM International ISDN PC Card in the PCMCIA slot. Disconnect
Disconnect its cable from the ISDN line.
2. Click Start -> Settings -> Control Panel to open the Control Panel.
3. Double-click the Add/Remove Programs icon.
Select ISDN CAPI Port in the list of installed programs, then click
Add/Remove. When the CAPI Port Drivers have been removed, confirm that
you want to restart the computer.
ISDNmst.fm Page 153 Wednesday, January 15, 2003 9:22 AM