Filter
Top Products
40 IBM ISDN PC Card:User’s Guide
Drivers. If the phone book does not display, perform the following steps to
install RAS on your computer.
Installing remote access
Before you install Remote Access Service, check the documentation for your
notebook computer to see whether your system has an integrated analog modem.
If so, install the modem device driver according to the instructions in the
documentation, or contact the notebook computer manufacturer's technical
support.
Also make sure that you have at least one physical COM port available in your
Windows NT 4.0 system. Double-click the Ports applet in the Control Panel to
obtain this information.
1. Double-click the My Computer icon on the Windows NT 4.0 desktop, then
double-click Dial-Up Networking. If a window opens informing you that
Dial-Up Networking is not installed on your computer, then click Install.
2. The Files Needed window prompts you for the source directory of your
Windows NT 4.0 Setup files. Type the correct path in the Copy files from
field, then click OK. Windows NT installs the necessary files.
3. After these files have been installed, the RAS setup searches for a RAS-capable
device. Click OK to start the modem installer.
4. When the modem installer has started, check the option Don't detect my
modem; I will select it from a list, and click Next. If you have an integrated
analog modem, then follow the installation instructions provided by your
computer manufacturer. Otherwise, select (Standard Modem Types) in the
list of manufacturers, then Dial-Up Networking Serial Cable between 2 PCs,
and click Next.
ISDNmst.fm Page 40 Wednesday, January 15, 2003 9:22 AM