Filter
Top Products
106 IBM ISDN PC Card:User’s Guide
When the CompuServe 2000 access software searches for a modem, it detects the
IBM International ISDN PC Card as illustrated below.
Click Next to set up CompuServe 2000 with the selected modem emulation, and
follow all further instructions displayed on your screen.
CAPI 2.0-compliant CompuServe 2000 in Windows 9x, Me with
cFos installed
In some countries such as Germany and the UK, CompuServe ships its access
software as “CompuServe 2000”. Unlike earlier versions, this software is designed
to handle CAPI 2.0-compliant ISDN hardware.
To use CompuServe in Windows 9x or Windows Me with cFos installed, do the
following:
1. After you have installed the CompuServe 2000 software, check the cFos
configuration. To do so, click Start -> Programs -> cFos ISDN & DSL Driver -
> Configure cFos. In the cFos Configuration program, click Configure MSN
and parameters. If the parameter -kv appears in the additional parameters
field, remove it. Then click OK. Select Save changes, click OK and then
confirm that you want to restart your computer by clicking Yes.
2. After the system has restarted, verify that you have installed either the cFos
ISDN, CompuServe or the cFos ISDN, X.75, Defaults, Mailbox Settings
modem emulation. Make a note of the COM ports on which these modem
emulations are installed.
3. Now you can start CompuServe 2000 and let it search for modems. The
software detects your IBM International ISDN PC Card as illustrated below.
Select the modem entry that corresponds to your cFos modem emulation.
ISDNmst.fm Page 106 Wednesday, January 15, 2003 9:22 AM