Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 113
After you have successfully logged on, the Dial-up Networking icon appears in
the system tray on the task bar. Click this icon to hang up the connection, or select
Open Dial-up Monitor to get information about your connection, including the
DCE connection speed (bps) and your IP address (Details button).
CompuServe 4.02 and higher in Windows 2000
The following installation instructions are based on the CompuServe 4.0.2
installation Help file for Windows NT 4.0 and modified for use in Windows 2000
Professional. If you experience problems of any kind with these instructions,
please contact your local CompuServe help desk for further assistance.
Unless otherwise noted, all settings or selections should be left at their default
values.
To use CompuServe 4.02 or higher in Windows 2000, do the following:
1. Click Start -> Settings->/ Network and Dial-Up Connections. Double-click
Make New Connection to start the Network Connection Wizard.
2. In the first window, click Next. In the following window, select the option
Dial-up to the Internet, then click Next. Now select I want to set up my
Internet connection manually, or I want to connect through a local area
network (LAN) and click Next. In the next window, choose the option I
connect through a phone line and a modem, then click Next.
3. In the Choose Modem window, select one of the following modem entries:
• cFos ISDN, CompuServe
• cFos ISDN, X.75, Defaults, Mailbox Settings
ISDNmst.fm Page 113 Wednesday, January 15, 2003 9:22 AM