Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 155
To remove the CAPI Port drivers from Windows XP:
1. Leave the IBM International ISDN PC Card in the PCMCIA slot. Disconnect
its cable from the ISDN line.
2. Click Start -> Control Panel to open the Control Panel.
3. Double-click the Add or Remove Programs icon.
4. Make sure that Change or Remove Programs is selected in the column at left.
Select ISDN CAPI Port in the list of currently installed programs.
Click the Change/Remove button. When the software has been removed,
restart your computer.
Once the computer has restarted, the removal of the CAPI Port Drivers is
complete.
CAPI Port troubleshooting and frequently asked questions
General
Which of the CAPI Port Driver's modem emulations should I use to connect to
the Internet?
To set up Internet access using the CAPI Port Driver, see the section on Internet
access using cFos in the User's Guide for the IBM International ISDN PC Card.
When you are prompted to select a device for the Internet connection, you may
select the following CAPI Port driver modem emulations:
• ISDN Internet (PPP over ISDN)
• ISDN RAS (PPP over ISDN)
Can I use both cFos and the CAPI Port Driver?
cFos and the CAPI Port Drivers provide similar capabilities. You may use both
together, or you may replace one with the other.
Windows 95
ISDNmst.fm Page 155 Wednesday, January 15, 2003 9:22 AM