Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 77
from a list and click Next button. In the Manufacturers window, select cFos
Software Bonn and the modem emulation you wish to use.
9. In the next window, select the COM port you wish to use and click Next and
then click Finish.
Note: Some software packages require a COM port between 1 and 4. Be
careful when selecting the COM port. Selecting a wrong COM port
may cause sever problems.
10. Back in the modem properties window click Close if you have chosen all
modem emulations you want to use. Otherwise, repeat the relevant sections of
steps 8 and 9 again and click Close when you are done.
11. Now the Dial-up Networking needs to be reconfigured. Click on Yes in order
to launch the Remote Access Setup. Click Add... button. In the Add RAS
Device window, click on OK. Repeat the add procedure until there are no
devices that can be added. Click Continue in the Remote Access Setup and
confirm that you want to reboot your computer by clicking Yes.
ISDNmst.fm Page 77 Wednesday, January 15, 2003 9:22 AM