Filter
Top Products
4. Installing the device drivers in Windows 95 13
Installing the IBM International ISDN PC Card in Windows 95
service release 1
When you have prepared Windows 95 by following the instructions above, you
are ready to install the IBM International ISDN PC Card.
1. Turn off the computer, choose a PCMCIA slot and insert the IBM International
ISDN PC Card into the slot without the ISDN cable attached.
2. Turn the computer back on. The New Hardware Found window opens and
reports that it has detected an ISDN PC Card.
3. Make sure that the option Driver from disk provided by hardware
manufacturer is selected, then click OK.
4. The Install From Disk window opens. Click Browse and select the letter of the
CD-ROM drive containing the IBM International ISDN PC Card Driver CD
in the Open window. Select the Win95 , then the DRV directory and confirm
your selection by clicking OK.
5. In the Install From Disk window, click OK once more to confirm that you
want to install the device drivers.
6. Click OK in the Select Device window. Installation of the device drivers
begins.
7. The next window lets you select the installation language. Confirm the default
language English by clicking OK or selecting your language from the list ,
then clicking Continue.
8. In the next window, specify the installation directory for the device drivers. By
default this path is C:\IBM_ISDN. Click Continue to confirm this path, or
enter a different path in the Directory field.
9. In the next window, select the appropriate D-channel protocol for your ISDN
line. For newer ISDN lines in Europe select DSS1, the Euro-ISDN D protocol.
NI-1 and 5ESS are D-channel protocols used in the United States of America.
1TR6 is the older national D-channel protocol for Germany.
ISDNmst.fm Page 13 Wednesday, January 15, 2003 9:22 AM