Filter
Top Products
80 IBM ISDN PC Card:User’s Guide
3. Read now the program license information which is presented in both
German and English. If you agree to the terms and conditions of usage, tick
the box to the left of I agree and click then on the Next button.
4. Next you can select the communication media. By default, the items "DSL
(PPPoE broadband access)" and "ISDN (CAPI 2.0)" are selected. The DSL
feature works anywhere in the world, provided that you are using a PPPoE-
controlled DSL modem. If you do not have an ADSL/ISDN connection, then
this feature is not applicable, and you must untick the box left to "DSL (PPPoE
broadband access)". For further assistance with this additional feature, please
contact the cFos support team.
If you are using the IBM International ISDN PC Card with the Euro-ISDN D-
channel protocol you can also enter an MSN, if desired. However you can
leave the relevant fields blank.
Note: For optimal performance, leave the MSN field blank and set the MSN
to use in your application software, if possible.
5. The next dialog allows you to select available COM ports for use with cFos.
Select the ports you want to use and then click Next.
6. The extended features dialog box allows you to install a basic firewall, time
synchronisation with the ISDN network, and an ISDN caller monitor. Untick
any feature that you do not want to have installed on the system. Click Nextto
continue with the installation of cFos.
7. The installer is now ready to proceed with the installation. Click on Install. In
the next window you can chose if you want to set up an internet connection
with cFos and if you want to block your ISDN card from dialing certain phone
numbers. Make your selection and click OK.
ISDNmst.fm Page 80 Wednesday, January 15, 2003 9:22 AM