Filter
Top Products
8. Installing the device drivers in Windows 2000 47
7. This returns you to the previous window, which now displays the correct
source drive and directory. Click OK.
8. The Found New Hardware Wizard informs you that appropriate device
drivers have been found. Click the Next button. Windows 2000 begins the
device driver installation.
9. When the ISDN - IBM International ISDN PC Card Setup window opens with
the subtitle ISDN Switch Type or D-channel Protocol, select the appropriate
protocol for your ISDN line. For newer ISDN lines in Europe, select European
ISDN (DSS1), the Euro-ISDN D-channel protocol. NI-1 and 5ESS are D-
channel protocols used in the United States of America.
10. After you have selected the appropriate D-channel protocol, click the Next
button. If you selected Euro-ISDN, you can now enter MSNs (Multiple
Subscriber Numbers). These numbers are used to identify individual ISDN
terminal devices such as telephones and computers. when more than one
device is connected to your ISDN line. (Due to an abbreviation error in
Windows 2000, the term "Multiple Subscriber Numbers" might have been
changed to "Multisubscriber Numbers". Please make your entries in the
relevant fields despite this incorrect designation.)
11. The Found New Hardware Wizard informs you when the installation has
been completed. Then click Finish to conclude the installation.
12. After the installation completes, connect the ISDN cable.
ISDNmst.fm Page 47 Wednesday, January 15, 2003 9:22 AM