Filter
Top Products
13. ISDN CAPI Port Device Driver 205
* For a detailed description of these parameters, see the "COMMON-ISDN-API
Version 2.0" specification. The CAPI 2.0 specification can be obtained free over the
Internet (http://www.capi.org).
** see also Section 4.3.2 "Suppressing Caller ID Display"
*** Generally, the number is the MSN given by the network provider (e.g. British
Telecom) without the dialing code. If your ISDN-Controller is connected to the
internal S0 bus of a PBX, use the MSN of the respective extension. For more
information, please refer to your PBX manual.
More detailed information about the application interface CAPI is available under
http://www.capi.org.
ATS54= 0 No caller ID suppression
(default)
1 Caller ID suppression
active***
ATA Accept an incoming call
ATD 0...9 Dial specified number
L Dial previous number
PIgnored
TIgnored
ATE 0 Echo in command mode off
1 Echo in command mode on
(default)
ATH Terminate existing
connection
ATQ 0 Display messages in
command mode (quiet)
1 Suppress messages in
command mode (quiet)
ATV 0 Display results as numeric
codes
1 Display results as text
("verbose") (default)
ATZ Reset
+++ Switch from on-line to
command mode
AT Command Va lue Parameter
ISDNmst.fm Page 205 Wednesday, January 15, 2003 9:22 AM