Filter
Top Products
7. Installing the device drivers in Windows NT 4.0 39
In this case, click Exit and select the entry for the adapter marked with a red X.
Select the menu command Actions / Stop. Remove the adapter from the PCMCIA
slot. Open the \EXTRAS/CW52NT\RegUpd directory on the IBM International
ISDN Pc Card Installation Software CD and select the IBMISDN.REG file.
Double-click the file and confirm that you want to update the Windows NT
Registry by clicking OK when prompted. Now reinsert the adapter. CardWizard
should display a message letting you know the ISDN PC card is successfully
inserted.
The evaluation version of SystemSoft's CardWizard 5.20 provided on the IBM
International ISDN PC Card support Web page does not exhibit this problem.
Your IBM International ISDN PC Card is now ready to use with any CAPI 2.0-
compliant application software.
Checking and installing Remote Access Service
To install the NDIS WAN CAPI device drivers, you must have Remote Access
Service installed. To check whether Remote Access Service (RAS) is installed on
your notebook computer, proceed as follows:
1. Double-click the My Computer icon on the Windows NT 4.0 desktop, then
double-click Dial-Up Networking.
2. If the phone book displays, then RAS is properly installed on your computer
and you can continue with the section Installing the NDIS WAN CAPI
ISDNmst.fm Page 39 Wednesday, January 15, 2003 9:22 AM