Filter
Top Products
210 IBM ISDN PC Card:User’s Guide
Removing the IBM ISDN PC Card from Windows NT
The following section assumes that you are logged on to a Windows NT 4.0
system as Administrator. If you are not logged on as Administrator, you might
not be able to perform all the steps outlined in this chapter.
To remove the IBM ISDN PC Card from Windows NT, do the following:
1. Leave the IBM International ISDN PC Card in the PCMCIA slot. Disconnect
the card’s ISDN cable from the ISDN line.
2. Click Start -> Settings -> Control Panel to open the Control Panel. Double-
click the Network icon.
Click the Adapters tab and then NDIS WAN CAPI Device Driver.
3. Click the Remove button and confirm that you want to remove this device.
4. Click Close. After Windows NT 4.0 has finished updating the network
configuration, restart your system.
5. When your computer has restarted, open the Control Panel again. Double-
click the Add/Remove Programs icon.
6. In the Install/Uninstall window, select ISDN CAPI Port in the list of
programs.
ISDNmst.fm Page 210 Wednesday, January 15, 2003 9:22 AM