Filter
Top Products
24 IBM ISDN PC Card:User’s Guide
Although some older ISDN lines in Germany still use the D-channel protocol
1TR6, DSS1 is generally preferable. The 1TR6 protocol is no longer very
common and might be removed from future device driver releases for this
adapter.
13. After you have selected the appropriate D-channel protocol, click Continue.
14. The final window informs you which resources are used by the IBM
International ISDN PC Card. Click Continue to complete the installation, then
connect the ISDN cable.
Your IBM International ISDN PC Card is now ready to use with any CAPI 2.0-
compliant software.
NDIS WAN CAPI driver installation in Windows 98
If you have not yet installed the CAPI 2.0-compliant device drivers, please return
to the corresponding chapters and install them first.
Note: During installation you may be asked to specify the location of the NDIS
WAN CAPI drivers a second time. In this case, simply enter the path to the
driver source files again.
To install the NDIS WAN CAPI Driver in Windows 98, do the following:
1. Insert the CD labeled “IBM International ISDN PC Card Installation
Software” into your computer's CD-ROM drive.
2. Click Start -> Settings -> Control Panel to open the Control Panel. Double-
click the Network icon.
3. In the Network Configuration window, click Add.
4. In the Select Network Component Type window, click Adapter, then Add.
5. In the Select Network Adapters window, click Have Disk.
6. In the Install From Disk window, click Browse. Select the CD-ROM drive in
the Drives list in the Open window, then browse to the path WIN98 \ NDIS.
Click OK.
7. Click OK to close the Install From Disk, Select Network adapters, and
Network dialogs.
ISDNmst.fm Page 24 Wednesday, January 15, 2003 9:22 AM