Filter
Top Products
104 IBM ISDN PC Card:User’s Guide
You can rename the modified connection if desired. You are now ready to connect
to your Internet Service Provider over two ISDN B channels simultaneously.
Using CompuServe
In order to be able to use CompuServe with your IBM International ISDN PC
Card, you must have cFos installed, unless you only plan to use CompuServe
2000 on your system. In this case, you may not need to install cFos at all.
Please ask your local CompuServe help desk what communication protocol is
used for dial-in. In Europe the X.75 protocol is widely used.
IBM has tested the CompuServe 3.0 and higher access software under Windows
95, 98 and ME, and CompuServe 4.0.x and higher access software under Windows
NT 4.0 and Windows 2000 Professional.
CompuServe 3.0 and non-CAPI 2.0-compliant CompuServe
dialers in Windows 9x, Me
Note: The screen shots in this section may vary somewhat from the user
interface you see on your screen.
Before you can use CompuServe 3.0 or any non-CAPI 2.0-compliant CompuServe
access software, you must configure cFos for use with it by installing either the
“cFos ISDN, X.75, Defaults, Mailbox Settings” or the “cFos ISDN, CompuServe”
modem emulation on any available COM port.
ISDNmst.fm Page 104 Wednesday, January 15, 2003 9:22 AM