Filter
Top Products
10. Configuration and diagnostics of the IBM International ISDN PC Card 61
The following section describes how to add or change the configuration of
Multiple Subscriber Numbers in the NDIS WAN CAPI device driver. Although
MSNs can be configured in the device driver, you should enter MSN settings only
in applications that require them. You must have the NDIS CAPI WAN device
drivers installed in order to perform the following steps. Note that MSNs are a
feature of the Euro-ISDN (DSS1) switch protocol only!
1. Click Start -> Settings -> Control Panel. Double-click the Network icon.
2. In the Network Settings window, click the Adapters tab, select the NDIS
WAN CAPI Driver, and then click Properties.
3. In the Properties window, type the MSNs for each line and click OK, then
Close.
ISDNmst.fm Page 61 Wednesday, January 15, 2003 9:22 AM