Filter
Top Products
11. Implementations of the IBM International ISDN PC Card 71
4. Next you can select the communication media. By default, the items DSL
(PPPoE broadband access) and ISDN (CAPI 2.0) are selected. The DSL
feature works anywhere in the world, provided that you are using a PPPoE-
controlled DSL modem. If you do not have an ADSL/ISDN connection, then
this feature is not applicable, and you must untick the box to the left of DSL
(PPPoE broadband access). For further assistance with this additional feature,
please contact the cFos support team.
If you are using the IBM International ISDN PC Card with the Euro-ISDN D-
channel protocol, you can also enter an MSN, if desired. However, you can
leave the relevant fields blank.
Note: For optimal performance, leave the MSN field blank and set the
MSN to use in your application software, if possible.
5. The next dialog allows you to select available COM ports for use with cFos.
Select the ports you want to use.
6. The extended features dialog box allows you to install a basic firewall, time
synchronisation with the ISDN network, and an ISDN caller monitor. Untick
any feature that you do not want to have installed on the system.
The following parameters should be used during the installation of cFos:
•-ki
•-kr
The above information was obtained from the cFos support team.
Click Next to continue with the installation of cFos.
ISDNmst.fm Page 71 Wednesday, January 15, 2003 9:22 AM