Filter
Top Products
CTI 2572 Installation and Operation Guide
94
10BaseT Connector
Use unshielded twisted pair cables that comply with the IEEE 802.3 Type 10BaseT standard.
AUI Connector
Use transceivers or cables that comply with the IEEE 802.3 standard for Attachment Unit Interface.
AUI Power
Attach an external power supply capable of supplying at least 500ma at 12 VDC. This connector is
not fused; however, it is diode protected. When you are using external power, ensure that the AUI
power switch on the 2572 is set to E
XTERNAL.
Figure 18. 10BaseT Connector
Figure 19. AUI Connector
Figure 20. AUI Power Connector