Filter
Top Products
CTI 2572 Installation and Operation Guide
62
Configuring the CP343 Ethernet Module
Set the Network Connection properties of the CP343-1 module as shown below. The MAC address
is not used in TCP/IP connections, but some versions of Step 7 may require an entry. In this case you
may enter any arbitrary value that Step 7 will accept.
Configuring the Other Station (2572)
Enter the following Network Connection properties for the 2572 module. Again, the MAC ID is not
used by TCP/IP, but some versions of Step 7 may require the entry. You may any arbitrary value
acceptable by Step 7.