Filter
Top Products
CTI 2572 Installation and Operation Guide
143
HARDWARE SPECIFICATIONS
Ethernet Ports:
1 ea. - IEEE 802.3 10BaseT with RJ-45 connector.
1 ea. - IEEE 802.3 AUI port with female DB15 connector.
10BaseT port will be automatically selected if a Link Beat is present.
AUI Power may be derived from PLC backplane or from an external supply.
Serial Communications Ports:
1 ea. - RS-232C (subset) with Male DB9 Connector, DTE.
(RS-232 handshake lines include RTS, CTS, DSR, and DTR).
1 ea. - RS-422 with Female DB9 Connector.
1500 VDC Isolation - channel to PLC.
Standard Serial Port Communications Parameters:
Data Rate: 1200,2400,9600,19200 Baud (switch selectable)
Data Bits: 7
Parity: Odd
Stop Bits: 1
Hardware Handshaking: Disabled, Enabled (switch selectable, RS-232 port)
Values in bold represent the factory switch settings.
Software Configurable Serial Port Communications Parameters
Data Rate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud
Data Bits: 5,6,7,8
Parity: Even, Odd, None
Stop Bits: 1,2
Handshaking: Hardware, Software, None
Diagnostic LEDs:
1 ea. - Module Status (ACTIVE)
3 ea. - Transmit Data (Serial Port 1, Serial Port 2, Ethernet)
3 ea. - Receive Data (Serial Port 1, Serial Port 2, Ethernet)
1 ea. - 10BaseT Link Beat Detected
1 ea. - AUI Port Selected
1 ea. - Collision Detected
1 ea. - Reversed Polarity (10BaseT Port).
Module Size:
Single Wide 505 I/O