Filter
Top Products
System BIOS Intel® Server Board SE7520JR2
Revision 1.0
C78844-002
84
Table 17: Sample BIOS Popup Menu
Please select boot device:
1
st
Floppy
Hard Drives
ATAPI CDROM
LAN PXE
EFI Boot Manager
↓and↑ to move selection
Enter to select boot device
ESC to boot using defaults
4.4 BIOS Setup Utility
The BIOS Setup utility is provided to perform system configuration changes and to display
current settings and environment information.
The BIOS Setup utility stores configuration settings in system non-volatile storage. Changes
affected by BIOS Setup will not take effect until the system is rebooted. The BIOS Setup Utility
can be accessed during POST by using the <F2> key.
4.4.1 Localization
The BIOS Setup utility uses the Unicode standard and is capable of displaying Setup screens in
English, French, Italian, German, and Spanish. The BIOS supports these languages for
console strings as well.
Keyboard Commands
While in the BIOS Setup utility, the Keyboard Command Bar supports the keys specified in the
following table.
Table 18: BIOS Setup Keyboard Command Bar Options
Key Option Description
Enter Execute Command The Enter key is used to activate sub-menus, pick lists, or to select a sub-field. If a pick
list is displayed, the Enter key will select the pick list highlighted item, and pass that
selection in the parent menu.
ESC Exit The ESC key provides a mechanism for backing out of any field. This key will undo the
pressing of the Enter key. When the ESC key is pressed while editing any field or
selecting features of a menu, the parent menu is re-entered.
When the ESC key is pressed in any sub-menu, the parent menu is re-entered. When
the ESC key is pressed in any major menu, the exit confirmation window is displayed
and the user is asked whether changes can be discarded. If “No” is selected and the
Enter key is pressed, or if the ESC key is pressed, the user is returned to where they
were before ESC was pressed without affecting any existing any settings. If “Yes” is
selected and the Enter key is pressed, setup is exited and the BIOS continues with
POST.
↑
Select Item The up arrow is used to select the previous value in a pick list, or the previous options
in a menu item's option list. The selected item must then be activated by pressing the
Enter key.
↓
Select Item The down arrow is used to select the next value in a menu item’s option list, or a value
field’s pick list. The selected item must then be activated by pressing the Enter key.