Filter
Top Products
Intel® Server Board SE7520JR2 System BIOS
Revision 1.0
C78844-002
99
Feature Options Help Text Description
Secure Mode Boot
Disabled
Enabled
When enabled, allows the host
system to complete the boot
process without a password. The
keyboard will remain locked until a
password is entered. A password
is required to boot from diskette.
This node is grayed out if a user
password is not installed.
Diskette Write
Protect
Disabled
Enabled
Disable diskette write protection
when Secure mode is activated. A
password is required to unlock the
system.
This node is grayed out if a user
password is not installed. This
node is hidden if the Intel
Management Module is not
present.
Video Blanking
Disabled
Enabled
Blank video when Secure mode is
activated. A password is required
to unlock the system. This option
controls the embedded video
controller only.
This node is grayed out if a user
password is not installed. This
node is hidden if the Intel
Management Module is not
present.
Power Switch Inhibit
Disabled
Enabled
Disable the Front Panel Power
Switch when Secure mode is
activated. A password is required
to unlock the system.
This node is grayed out if a user
password is not installed. This
node is hidden if the Intel
Management Module is not
present.
NMI Control
Disabled
Enabled
Enable / disable NMI control for
the front panel NMI button.
4.4.2.5 Server Menu
Table 38: BIOS Setup, Server Menu Selections
Feature Options Help Text Description
System management N/A N/A Selects submenu.
Serial Console Features N/A N/A Selects submenu.
Event Log configuration N/A Configures event logging. Selects submenu.
Assert NMI on SERR Disabled
Enabled
If enabled, NMI is generated on
SERR and logged.
Assert NMI on PERR Disabled
Enabled
If enabled, NMI is generated.
SERR option needs to be
enabled to activate this option.
Grayed out if “NMI on
SERR” is disabled.
Resume on AC Power Loss
Stays Off
Power On
Last State
Determines the mode of
operation if a power loss occurs.
Stays off, the system will remain
off once power is restored. Power
On, boots the system after power
is restored.
“Last State” is only
displayed if the Intel
Management Module is
present. When
displayed, “Last State” is
the default.
When set to “Stays Off,”
“Power Switch Inhibit” is
disabled.
FRB-2 Policy
Disable BSP
Do not disable BSP
Retry on Next Boot
Disable FRB2 Timer
This controls action if the boot
processor will be disabled or not.
“Disable BSP” and “Do
not disable BSP” are only
displayed if the Intel
Management Module is
present.