Filter
Top Products
System BIOS Intel® Server Board SE7520JR2
Revision 1.0
C78844-002
98
nth Drive Varies Specifies the boot sequence from the available
devices.
Varies based on system configuration.
4.4.2.4 Security Menu
Table 37: BIOS Setup, Security Menu Options
Feature Options Help Text Description
Security Settings
Administrator
Password is
N/A Install / Not installed Informational display.
User Password is N/A Install / Not installed Informational display.
Set Admin
Password
N/A Set or clear Admin password Pressing enter twice will clear the
password. This option is grayed
our when entering setup with a
user password.
Set User Password N/A Set or clear User password Pressing enter twice will clear the
password.
User Access Level No Access
View Only
Limited
Full Access
LIMITED: allows only limited fields
to be changed such as Date
and Time.
NO ACCESS: prevents User
access to the Setup Utility.
VIEW ONLY: allows access to the
Setup Utility but the fields can not
be changed.
FULL: allows any field to be
changed.
This node is grayed out and
becomes active only when Admin
password is set.
Clear User
Password
N/A Immediately clears the user
password.
Admin uses this option to clear
User password (Admin password
is used to enter setup is required).
This node is gray if Administrator
password is not installed.
Fixed disk boot
sector protection
Disabled
Enabled
Enable/Disable Boot Sector Virus
Protection.
Password On Boot
Disabled
Enabled
If enabled, requires password
entry before boot.
This node is grayed out if a user
password is not installed.
Secure Mode Timer
1 minute
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes
Period of key/PS/2 mouse
inactivity specified for Secure
Mode to activate. A password is
required for Secure Mode to
function. Has no effect unless at
least one password is enabled.
This node is grayed out if a user
password is not installed.
Secure Mode Hot
Key (Ctrl-Alt- )
[L]
[Z]
Key assigned to invoke the secure
mode feature. Cannot be enabled
unless at least one password is
enabled. Can be disabled by
entering a new key followed by a
backspace or by entering delete.
This node is grayed out if a user
password is not installed.