Filter
Top Products
80-99208-1 Rev. D 6-1
6 AT COMMAND REFERENCE
This chapter provides complete details about the AT
command set for the QUALCOMM Globalstar GSP-1620
Satellite Data Modem. The AT command set is the control
interface between the Data Terminal Equipment (DTE) and
Data Communications Equipment (DCE).
For a handy quick reference to all AT commands, see the
tables at the beginning of this chapter:
• Table 6-1, “Operational AT Commands” — lists the AT
Commands recognized by the modem software.
• Table 6-2, “Non-Operational AT Commands” — lists
commands that are recognized, but not supported, by the
modem. For example, because the modem has no speaker,
the command to set speaker volume will neither set the
volume nor return an
ERROR. The command is accepted,
but performs no action.
Reference sections in this chapter contain complete details for
each AT command, organized into the following groups:
• Basic AT Commands (page 6-8)
• Basic Action Commands (page 6-18)
• Basic S-Registers (page 6-24)
• Globalstar-Specific S-Register Extensions (page 6-31)
• Extended Configuration AT Commands (page 6-32)
• Online-Command Mode Commands (page 6-40)
• Dormant Mode Commands (page 6-48)
• SMS Commands (page 6-51)
• Error Log Services Commands (page 6-59)
• Service Status Commands (page 6-61)