Filter
Top Products
Integrator’s Reference Manual
6-56 80-99208-1 Rev. D
SMS Lock ($QCSMSL)
Syntax
$QCSMSL[=<lock>]
Description
Lock or unlock (that is, set or clear the LOCK flag of) the
current SMS message. When a message is locked, it will not
be “autodeleted.”
“Autodelete” is a mechanism used to make room for newly
arriving SMS messages, if storage memory is needed, by
erasing OLD (previously read) text messages.
Note
The user may delete locked messages without unlocking them.
Values
Default Value
Power-On Default
N/A.
LENGTH: This field is the decimal count of the
number of 8-bit bytes in the SMS message
MESSAGE field.
MESSAGE This field is the user data payload sent in
the SMS message. Normally this field is
text data such as a page or e-mail.
However, for purposes of the Data Services
it can contain application-specific binary
data as well.
Table 6-5. SMS Print Command Field Definitions (continued)
Field Name Description
0 Unlock the current message (clear the lock flag).
1 Lock the current message (set the lock flag).
1 Lock the current message.