Qualcomm GSP-1620 Modem User Manual


 
80-99208-1 Rev. D xiii
LIST OF TABLES
Table 1-1. Typical GSP-1620 Modem Applications ......................1-3
Table 1-2. Checklist of Modem Integrator’s Kit Components ......1-8
Table 2-1. DTR Switch Positions ...................................................2-8
Table 3-1. Service Programming Parameters You Must Set ......3-5
Table 3-2. Bulk Service-Programming Options ............................3-7
Table 5-1. Packet vs. Asynchronous Data ...................................5-4
Table 5-2. Port Signal Lines ..........................................................5-8
Table 5-3. Port Arbitration Behavior .........................................5-10
Table 5-4. Port(s) Affected by AT Commands ............................5-14
Table 5-5. Sample Typical Modem Initialization Strings .........5-36
Table 6-1. Operational AT Commands .........................................6-2
Table 6-2. Non-Operational AT Commands .................................6-6
Table 6-3. Result Codes for Basic AT Parameter Commands ......6-9
Table 6-4. Common Result Codes for S-Register Commands ....6-24
Table 6-5. SMS Print Command Field Definitions ....................6-54
Table 6-6. SMS Info Command Field Definitions ......................6-59
Table 6-7. Modem Status Information .......................................6-63
Table 7-1. Interface Connector Pinouts ......................................7-10
Table 7-2. Diagnostic Port Pinouts .............................................7-14
Table 7-3. Modem DC Power Consumption Estimates
at 12 V DC Input .........................................................7-17
Table 7-4. Suggested RF Cable and Connector Suppliers ..........7-26
Table 7-5. Swept Sine Vibration Definition ...............................7-33
Table 8-1. Troubleshooting Modem Problems ..............................8-1
Table E-1. Specification Summary — GSP-1620 Modem .......... E-1
Table E-2. Specification Summary — Dielectric Resonator
Antenna (DRA) ............................................................ E-3