Filter
Top Products
Integrator’s Reference Manual
6-32 80-99208-1 Rev. D
Valid Value(s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
Results Returned
See Table 6-4 on page 6-24 for result code details.
Extended Configuration AT Commands
This section defines the extended AT configuration
commands for the modem and the functionality provided by
each.
Set Forward MUX Option (+CMUX)
Syntax
+CMUX[=<value>|?|=?]
Description
Sets the modem’s multiplex option for packet data calls. The
multiplex option selects the requested rateset for IS-95 calls.
This command affects IS-95 packet data calls only. This
command does not apply to Globalstar mode, which can only
operate at 9600 baud.
+CMUX? queries the current <mux> setting. +CMUX=? queries for
the acceptable range of
<value>.
Valid Value(s)
Missing Parameter Default Value(s)
2
0-255 Silent-Retry timeout in seconds
150 seconds
1 Selects IS-95 rateset 1. This is roughly equivalent to
9600 baud.
2 Selects IS-95 rateset 2. This is roughly equivalent to
14.4K baud.