Filter
Top Products
AT Command Reference
80-99208-1 Rev. D 6-11
Monitor Speaker Mode (M)
Syntax
M[<value>]
Description
Controls when the DCE speaker is on. The modem has no
concept of a monitor speaker. Therefore, this command is
recognized but does nothing.
Values
Power-On/Reset Default Value(s)
None.
Results Returned
OK
or ERROR; see Table 6-3 on page 6-9 for details.
Select Pulse Dialing (P)
Syntax
P
Description
Causes subsequent dialed digits to be signaled using pulse
dialing. This command is recognized but does nothing.
Valid Values
None.
Power-On/Reset Default Value(s)
None.
Results Returned
OK
or ERROR; see Table 6-3 on page 6-9 for details.
0 Speaker is always off and never turned on.
1 Speaker on until carrier has been detected.
2 Speaker is always on when OFF-Hook.