Filter
Top Products
AT Command Reference
80-99208-1 Rev. D 6-27
Command Line Editing Character (S5)
Syntax
S5{=<value>|?}
Description
Represents the value of the character recognized by the
modem as the backspace character. When the modem
receives this character, it interprets it as a request to delete
the previous character in the command line currently being
entered.
Valid Value(s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
Results Returned
See Table 6-4 on page 6-24 for result code details.
Pause Before Blind Dialing Time (S6)
Syntax
S6{=<value>|?}
Description
Represents the amount of time the DCE waits before dialing
a valid Dial Number.
This parameter is valid only for asynchronous data services.
It is sent to the Gateway IWF modem if different from the
default value but is otherwise not used by the modem.
Valid Value(s)
Missing Parameter Default Value(s)
N/A
0-127 Range of ASCII characters that can be set as the line
editing (backspace) character
8 Backspace character
2-10 Number of seconds to wait before blind dialing