Filter
Top Products
AT Command Reference
80-99208-1 Rev. D 6-41
Missing Parameter Default Value(s)
N/A.
Power-On/Reset Default Value(s)
N/A.
Results Returned
Asynchronous Data through Gateway IWF Commands
These commands support asynchronous data connections.
They have no effect locally. They are merely collected locally
and sent to the Gateway IWF for processes at the beginning
of an asynchronous data call.
Set Remote Config String (+CFG)
Syntax
+CFG[=<string>|?]
Description
Sets the remote configuration string sent to the IWF. The
string, up to and including the termination character but
excluding the quote (
"") characters, is stored by the modem
and sent to the Gateway IWF prior to connecting an
asynchronous data call (either mobile-originated or
mobile-terminated).
Each transmission of a
+CFG command from the DTE replaces
the contents of the previous string. The string may be up to
248 characters long.
+CFG? queries the current setting of the config <string>.
+CFG=? is not a valid query and will return an ERROR
result code.
Result Code Condition
OK Escape sequence recognized.
Online-Command mode is active.
None. Continue in Online
mode.
Escape sequence was not
recognized.