Filter
Top Products
Integrating GSP-1620 Modems into OEM Products
80-99208-1 Rev. D 7-21
from time to time upon notice to the buyer. The product
markings shall appear in a size and location reasonably
agreed to by both parties.
Figure 7-3 shows the QUALCOMM marking suitable for
OEM enclosures (included on the Modem Integrator’s Kit CD
as an Encapsulated PostScript [EPS] file).
Figure 7-3. QUALCOMM Mark for OEM Enclosures
Integrated Product Regulatory Labeling
The GSP-1620 modem as delivered by QUALCOMM
Incorporated is approved and labeled in accordance with the
requirements of the FCC and the European Union (see
Appendix B, RF Certification/Restrictions).
If the regulatory labeling is not visible when the modem is
integrated into the final product, then the labels must be
applied to the product enclosure. QUALCOMM Incorporated
authorizes the duplication and use of these regulatory
approvals on the integrated product provided that the modem
has not been modified or altered to the extent that the
electromagnetic performance has been degraded (see Modem
Mounting Guidelines on page 7-19 and Appendix B, RF
Certification/Restrictions).
The OEM or integrator is responsible for ensuring that the
product complies with all the regulatory requirements for
their target market and labeled accordingly.
The label must be located on the product in an area that can
be easily viewed and the type size must be large enough to be
legible without the aid of magnification. The integrator
labeling may be worded as follows:
“This Product Contains a Globalstar Radio Transceiver
FCC ID: J9CGSPDM1; CE 168”