Filter
Top Products
AT Command Reference
80-99208-1 Rev. D 6-25
Automatic Answer (S0)
Syntax
S0{=<value>|?}
Description
The S0 parameter sets the number of rings before the modem
will auto-answer an incoming asynchronous data call.
Valid Value(s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
0
Results Returned
See Table 6-4 on page 6-24 for result code details.
Command Line Termination Character (S3)
Syntax
S3{=<value>|?}
Description
Represents the value of the character recognized by the
modem as the command line termination character. When
the modem receives a command line from the DTE, this
character indicates termination of the command line. This
character is also transmitted by the modem to terminate the
result code.
If this value is changed in the command line, the response to
that command line will use the new value.
0 Automatic answering is disabled.
1-255 Number of rings before an incoming asynchronous
call is automatically answered.