Filter
Top Products
Integrator’s Reference Manual
6-50 80-99208-1 Rev. D
Packet No Dial ($QCPKND)
Syntax
$QCPKND[=<mode>|?|=?]
Description
Modifies the behavior of the modem when it receives a data
packet, while not in a data call. This allows the modem to
originate (or not originate) a packet data call upon receipt of
a packet without first receiving a Dial command. This feature
is necessary for modem-reestablished dormant-mode packet
data calls.
Select option
0 if you are making only packet data calls. Select
option
2 if mixing packet data calls and other types of data
calls (e.g., asynchronous data). If you do not want dormant
mode, select option
1.
Valid Value(s)
Missing Parameter Default Value(s)
0
Power-On/Reset Default Value(s)
0
0 Disable Packet No Dial. If a packet is received by the
modem while not in a data call, the modem
originates a packet data call in the current mode,
even though a Dial command was not received.
1 Enable Packet No Dial. If a packet is received by the
modem while not in a data call, the modem discards
the packet and does nothing.
2 Selective Packet No Dial. If the last data services call
initiated with the Dial command was a packet data
call, then upon receipt of a packet the modem
originates a packet data call in the current mode. If
the last data services call was NOT a packet data call
(for example it was an asynchronous call), then upon
receipt of a packet the modem discards the packet
and does nothing.