Filter
Top Products
Integrator’s Reference Manual
6-12 80-99208-1 Rev. D
Result Code Suppression (Q)
Syntax
Q[<value>]
Description
Determines whether or not result codes are transmitted from
the modem (DCE) to the DTE. When result codes are
suppressed, no result is transmitted to the DTE.
Note
Because the modem depends on the CONNECT result code returned by
the Gateway IWF (for asynchronous data calls), this command is not
transmitted as part of the remote configuration.
Valid Values
Power-On/Reset Default Value(s)
0
Results Returned
0 DTE transmits result codes.
1 Result codes are suppressed and not transmitted.
Result Code Condition
OK The command was correctly recognized and
processed with any required <value> being
set.
ERROR The command was unrecognized, the <value>
parameter was out of range or some syntactical
error was encountered.
(none) No result codes are transmitted when <value>
is set to 1.