Filter
Top Products
Integrator’s Reference Manual
6-18 80-99208-1 Rev. D
Results Returned
OK
or ERROR; see Table 6-3 on page 6-9 for details.
Basic Action Commands
This section defines the basic AT action commands for the
modem and the functionality provided by each.
Answer Incoming Call (A)
Syntax
A
Description
Instructs the GSP-1620 modem (DCE) to answer an incoming
asynchronous data call. The modem establishes a connection
with the Gateway IWF modem, transmits appropriate
configuration data to the Gateway IWF modem, sends the
A
command to the Gateway IWF modem, telling it to connect to
the host modem, and waits for the
CONNECT (or other) result
code.
Note
Any additional commands that appear after the A command on the
same command line are ignored.
Note
This command can be aborted by DCE reception of any character on
the Rm interface. The command is aborted only if the DCE receives the
character prior to establishing the connection and sending the CONNECT
result code.