Filter
Top Products
AT Command Reference
80-99208-1 Rev. D 6-29
Comma Dial Modifier Time (S8)
Syntax
S8{=<value>|?}
Description
Specifies the amount of time, in seconds, that the modem
pauses, during dialing, when a “,” (comma) is encountered in
the dial string.
This parameter is valid only for asynchronous data services.
It is sent to the Gateway IWF modem if different from the
default value but is otherwise not used by the modem.
Valid Value(s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
Results Returned
See Table 6-4 on page 6-24 for result code details.
Carrier Detect Threshold Timeout (S9)
Syntax
S9{=<value>|?}
Description
Specifies the amount of time, in 0.1 second increments, that
the modem should wait before dropping DCD after the
signaling carrier is lost.
This parameter is valid only for asynchronous data services.
It is sent to the Gateway IWF modem if different from the
default value but is otherwise not used by the modem.
0 Disabled. Modem does not pause when “,” is
encountered.
1-255 Number of seconds to pause.
2 seconds