Filter
Top Products
Integrator’s Reference Manual
5-18 80-99208-1 Rev. D
Once the DTE application receives an SMS alert, it is up to
the application to read the SMS message, using the
AT$QCSMSP command.
SMS Message Field Information
SMS messages can contain the following field information:
•Length of SMS
• Read status (new/read)
• Lock status
• Call back number (if available)
• Type (alpha, numeric, voice mail — these are
carrier-specific fields)
• Priority (urgent, normal)
• Time received
• Message content
SMS AT Commands
You can use the following SMS commands:
• Navigate through SMS messages (
AT$QCSMSM).
• Delete SMS messages (
AT$QCSMSM).
• Print/display current SMS message (
AT$QCSMSP).
• Lock or unlock SMS messages (
AT$QCSMSL).
• Turn on/off SMS alerting (
AT$QCSMSA).
• Get information on SMS messages stored in memory
(
AT$QCSMSI).
Note
For more information, see SMS Commands on page 6-51.
Using SMS for Mobile-Terminated Calls
You can use SMS as a way of answering mobile-terminated
calls (even if the Gateway software does not yet support
mobile-terminated calls).