Filter
Top Products
Integrator’s Reference Manual
6-48 80-99208-1 Rev. D
Valid Value(s)
Missing Parameter Default Value(s)
Power-On/Reset Default Value(s)
Results Returned
Dormant Mode Commands
Dormant mode allows the modem to disconnect the active
data call, to save on over-the-air usage and charges, while
allowing the Gateway to maintain the state of the current
data call (e.g., assigned IP address). This allows for faster
reconnects when more data packets need to be sent or
received.
The dormant mode AT commands are
+CTA and $QCPKND. Also
see DCE Received Line Signal Detector Behavior (&C) on page
6-16.
Note
Dormant mode is not available for asynchronous calls.
<string> <user defined download string>
"" empty string
"" empty string
Result Code Condition
OK Parameters are recognized and have
been processed correctly.
ERROR A parameter value was out of range
or a syntax error was encountered.
+MS: <string> ? is used to query current settings.