Filter
Top Products
99-00984-20-B0
5 | CHAPTER 1 – ABOUT YOUR SMART BOARD 685IX INTERACTIVE
WHITEBOARD SYSTEM
• Two HD-DB15 (VGA) inputs and associated audio input (3.5 mm jack) and one
HD-DB15 (VGA) output and associated audio output (3.5 mm jack) with additional
interface support for Component YPbPr and Component YCbCr inputs with
proper adapters (not included)
• RJ45 cable for Ethernet connections
• RS-232 connector
• USB B receptacle for service access
In addition, the UX60 projector system includes a fully labeled ECP, which includes
the following connection receptacles for the ECP harness cable and your source
inputs:
• The ECP harness cable connection receptacles that include:
– A DB15F receptacle for analog video input, located behind the whiteboard
– USB A and B receptacles for whiteboard and wire management bundle
connections, located behind the whiteboard
– A composite video input (RCA jack) and associated dual-channel audio input
(two RCA jacks) on the front of the ECP
– A USB A receptacle on the front of the ECP
Standard Accessories
SMART provides the following accessories with your SMART Board 685ix interactive
whiteboard system.
Standard SMART Board Interactive Whiteboard Accessories
Pen Tray Tools
The pen tray tools include four pens and an eraser. The pens
have a rubberized grip area, colored to match the four colors
of digital ink: black, green, red and blue. You can use
dry-erase markers instead of the supplied pens, as long as
they’re a similar shape and don’t scratch or mark the surface
of the interactive whiteboard. If the pens you provide don’t reflect infrared light, the
pen tray sensor might not detect the presence of the pen. You can use EXPO®
markers or other substitutes.
Pens from earlier interactive whiteboards weren’t designed to reflect infrared light, so
the pen tray might not detect them reliably. You can wrap light-colored tape around
the pen to improve the reflection of infrared light and to help with tool detection.